Guides and tutorials
Find guides and video tutorials here!
Installation Quick Guide
The CubicMeter can be installed in any position and at any angle. The meter can be installed vertically on an incoming pipe, at any angle and even wit...
Connecting to a LoRa Network
If you want to ping your device to establish a connection to your network, use the steps below: Cover the IR eye with a reflective surface (like the a...
Understanding Error Codes
Below is a list of the possible error codes.
No Sensing Errors
Below are common reasons your LCD display might be showing NO SENSING. Make sure to have enough water pressure in your pipes. The device will not be ...
Using the IR-Eye
You can use the reflective sticker to activate your CubicMeter by watching the video guide below. The video also provides troubleshooting tips for the...
Changing LoRa Networks
To switch your CubicMeter from its current network to a new one, follow these steps. ⚠️ This process requires a few days to allow a new network to jo...
Calibrating the CubicMeter
This allows you to have even higher flow rate accuracy with the CubicMeter, down to ±2%. Install the Device : Ensure that the CubicMeter is properly i...