No Sensing Errors
Edited
Below are common reasons your LCD display might be showing NO SENSING.
Water pressure is too low
Make sure to have enough water pressure in your pipes. The device will not be able to measure water flow properly if your water pipe's water pressure is lower than 0.5 bars.
The pipe is not in good condition
Ensure the pipe is free from debris, paint, dirt, rust, etc., and check for any bends or damage.
There is air in the pipe
If the CubicMeter is installed on a horizontal pipe, try to use a vertical pipe to ensure there are no air bubbles causing the pipe not to sense.
no sensing
display
error
flow
detection