Guides and Tutorials
Everything from unboxing you new device to pairing options.
Understanding the LED Colors
Below are the charts for each of the LEDs on the CubicSecure. LED MEANING ACTION NEEDED OFF The device has no power. Make sure the device is connecte...
How to restart my CubicSecure
⚠️ Please note that performing a factory reset will erase all applied firmware updates and settings such as hot/cold pairings. Unplug the micro-USB p...
How to re-activate the leak detection
If you have stopped the leak detection on your device (either from acknowledging an alarm or pausing this setting) and want to re-activate it, you can...
Pairing two CubicSecures
Follow the instructions below to pair two devices. Install and power on both devices. One for hot water and one for cold water. Hold down the CONNECT ...
How do I install my CubicSecure?
⚠️ The CubicSecure must be installed by a plumber according to the Safe Water Installation industry regulations. ___ Safety systems such as residenti...