Understanding Uplinks
Edited
Uplink frequency
The CubicMeter sends a LoRaWAN uplink every hour by default. The transmission frequency can be changed sending a downlink to the device, either from the Quandify portal or according to the Downlink Information for LoRaWAN Guide.
⚠️ Increasing the message frequency will impact the battery life.
How to trigger an uplink
To trigger a LoRaWAN uplink, place the activation sticker or any other metallic object over the IR eye for at least 10 seconds.
💡The radio symbol will blink when the message has been sent.
hourly
ping
Was this article helpful?
Sorry about that! Care to tell us more?