Reading the Display

Edited

The units perform an LCD check every 5 minutes. When it begins, the screen appears blank for 1 second and then all segments displayed for 1 second as a visual verification of the LCD screen’s full functionality. 

After the LCD check is complete, the following information is displayed in the following order, (1 second per item):

  1. Firmware version number 

  2. Firmware CRC32 checksum in hexadecimal format

  3. Current pipe temperature in °C

  4. Selected pipe setting type 

  5. Event/change-log counter

Was this article helpful?

Sorry about that! Care to tell us more?

Thanks for the feedback!

There was an issue submitting your feedback
Please check your connection and try again.